My existing mortgage was transferred to a new lender, then I refinanced, then the new mortgage was immediately transferred. I received four 1098 forms and entered in the information. Now my California home mortgage interest worksheet is listing my debt as being four times the amount it actually is! How do I resolve this?
If you received multiple Form 1098s, please review your entries in TurboTax to make sure you have answered all the questions correctly and entered the correct balance of your loan. TurboTax uses this information to calculate your mortgage interest deduction.
To review your Form 1098 entries:
Note:
For additional information, please see this TurboTax article
I'm having a similar issue as the original post. Refinanced my home in 2019 and I had two 1098. Inputed forms perfectly and answered questions correctly. I followed the recommended solution posted here. California Mortgage info is showing 2x mortgage value and Federal is assuming limited mortgage interest due to mortgage values in excess of the fed limit and I am getting an error in the Smart Check requiring me to input an interest limit.
I think this is a bug in the software that isn't recognizing the inputs as a refi.
I am having a similar issue. (Mine is 5x higher!). The original loan was taken to purchase the property in 2018. I entered that statement first. Box 2 for Outstanding Mortgage Principal is blank on that 1098, so I left that amount blank in TT too.
Some of the other 1098 forms had a value in Box 2 and some didn't. For those that listed a value there, the amount is a bit different from each other. I entered each into TT just as shown on each 1098, including the amount in Box 2 if it showed one.
Is my problem because some or all of my 1098 forms are incorrect? Should I simply ignore what is in Box 2 on the 1098 and show what should be there per your advice? (Enter the outstanding balance for the first loan for what it was 1/1/2019 and for subsequent loans leave that value blank?)
I'm having this issue as well. I refinanced my mortgage with the same lender in 2019, entered both 1098's and triple checked to make sure all info is correct, including refinance. Federal is requiring an answer to limitation, (because it thinks my value is higher) and California state shows my home acquisition value as double. I can't find a way to fix this and will be unable to file until Turbo Tax addresses the issue.
For the refinanced loans the amount in Box 2 needs to be $0. Since the loan were not started until 2019 at the beginning of 2019 there is not a balance for the loan.
Please review your 1098 forms and change the amount in box 2 for the refinanced loans.
But box 2 is supposed to be balance on date of origination (if not 1/1/19). I do not want to input something inconsistent with what is supposed to be in box 2
Box 2 is the balance on 01-01-2019 OR, if the loan was new in 2019, on the first day of the origination.
You do not need to enter a zero or leave it blank.
If you need to edit the 1098 section, I suggest you delete any 1098 forms you may have entered ,and enter the 1098's over fresh. Some screens only appear when the 1098 is first entered.
Enter the oldest 1098 first and follow the interview questions carefully.
If the loan was moved to a different lender in 2019 and you have two 1098's to enter:
First, delete both 1098's if you started entering them. Do NOT try to edit them.
Enter the older loan first, enter box 2 as it is reported,
THERE WILL BE A SCREEN ASKING "WAS THIS LOAN PAID OFF OR SOLD IN 2019?" CLICK "YES"
(this screen will not appear if you go back and edit)
Continue through the interview
Next, enter the second 1098
If box 2 is blank, enter zero, otherwise enter what is in box 2. DO NOT LEAVE IT BLANK
Continue through the interview questions. Do not select that it is a HELC.
Since you clicked that the first 1098 was paid off or refinanced with a different lender, the mortgage balances (box 2) will not be added together.
Even after following all of these steps, (which I already did the first time around anyway) It's still doubling my values. I even manually entered the paid off date on my first loan in "forms" mode. No luck. This is clearly a widespread issue, and I'm hoping there will be an update soon to fix it.
Same thing happened to me, at least initially. I followed all the steps, but the amount didn't change, however, I went out of TT and went back in and the issue got fixed! I can't think of anything else I did to trigger that. Maybe that will work for you.
310, when you exited TurboTax and went back in, did you re-enter the info or was it just magically fixed when you went back in?
when I input my 1098s, TT never inquires as to whether the loan was paid off or sold during 2019. I wish it did. Does it matter which version I am using? I am using Premier.
Question: what value did you put for box 2 on 1098 for the newer (refinanced) loan? Tax rules seem to say to put the amount at origination (which is what is in my box 2), but TT online seems to say to put 0 since there was no balance on Jan 1 2019. Desktop TT won’t let me enter 0 anyway, though.
Except for the original loan from 2018, I put zero in Box 2, and while that what was advised originally in this post, not sure that matches what shows in the tax instructions from the IRS. Except for the original loan I took in 2018, the other 4 1098's were for refinances and transfers, which seem to me to match the second two scenarios listed in the instructions respectively.
Box 2. Outstanding Mortgage Principal If you originated the mortgage in
Enter the amount of outstanding principal on the mortgage as of January 1, 2019.
2019, enter the mortgage principal as of the date of origination. If you acquired the mortgage in 2019, enter the outstanding mortgage principal as of the date of acquisition.
If you have an amount in box 2 of your form 1098 put it in as that is correct per IRS instruction as you mention. Once you get done entering all forms 1098 and click "Done" you will get to a questions asking if you exceed the mortgage limits.
"Do any of these situations apply to you?"
If you answer "No" inspite of what the worksheet calculations are, the interest deduction will not be limited. If you answer "Yes", then you will need to manually calculate the mortgage interest deduction using table 1 on page 12 in publication 936 and enter the amount in the box provided. The worksheets in either case are not filed; they are for calculations and records only.
I am having the same exact issue and have tried EVERYTHING suggested on this post and others. I even spent an hour on the phone with a TT rep. It still isn't fixed and is showing my mortgage as double what it should be. Please help.
The amount of your loan balance on the worksheet does not matter. That is only part of the program and is not transmitted to the IRS with your tax file.
If your daily balance is different than what shows on the worksheet, you may need to do some calculations. There are instructions for how to do that embedded into the software.
Then, enter the amount of interest that you can claim on the adjustment screen.
If you get an error concerning the balance, please follow these directions:
ONLINE USERS:
Please go back to the Home Mortgage Interest section:
Click Federal on the left side-bar
Click Deductions & Credits along the top
Scroll down to “Mortgage Interest and Refinancing (Form 1098)” Click Edit/Add
Scroll down the “Here’s your 1098 info” screen and click Done.
Next screen asks “Do any of these situations apply to you?” Select “Yes, one or all of these situations apply to me.” and Continue.
On the following screen, you will see the “Original amount”.
Enter the amount you can claim as a Home Mortgage Interest deduction in the “Adjusted amount” box. The Adjusted amount cannot be larger than the original amount or you will receive an error when trying to file. Instructions on who needs to adjust interest and how to calculate are available by clicking the blue “Help me figure this out” link.
DESKTOP USERS:
Go into Forms (top right)
Enter the amount on Tax & Int Wks
Mortgage Interest Limited Smart Worksheet section
Line A2
OR
Step by Step
Federal
Deductions & Credits
Mortgage Interest, Refinancing and Insurance Click Update
Click Done
Click Yes, one or both of these situations apply to me. And Continue
Enter the Adjusted amount and Continue
Does this imply that the whole process of entering the details from the 1098s, and dealing with TT inconsistencies with IRS forms, is essentially irrelevant, since the only thing that matters is your manual calculation of the limitation amount anyway? I've been fighting with the 1098 forms in TT for days, and even spent an hour on the phone with a CPA that works with Intuit... and the worksheets still don't have correct amounts on them... but the limitation calculations are correct, since I did them manually in TT.
Did anyone solve this issue yet?? I have mostly figured it the Federal so that it reports it properly, but the State form insists on adding the 2 refinanced loans as if they were one larger loan over 1 million, thereby reducing my State mortgage interest by $1100. I have not found a way to change it yet.
I spent 2 hours on the phone with TT the other day, and I still haven't resolved the issue.
Some TurboTax customers are experiencing an issue with their Home Mortgage Average Balance. This can cause the Home Mortgage Interest to be incorrectly limited.
If you're experiencing the issue above, please go here to receive email notifications when any updates related to this issue become available.
Yes, you may claim mortgage interest deduction regardless of the number of lenders as long as the loan does not exceed $750,000 for married filing joint ($375,000 for married filing separately). The home mortgage loan must be secured by the property to qualify for the deduction. The following are steps to enter deductible home mortgage interest:
See, why is my home mortgage, if any issues encountered.