I have ESPPs from which the Cost Basis reported to the IRS needs to be corrected.
I am following the same steps as I had in previous years with (e.g. with TT 2019, using the same step-by-step method) and some ESPP sale transactions refuse to come up with the right cost basis, insisting instead that it is "$0" and the whole discounted amount must be taxed (even though it was already taxed through the W2). I have tried entering these transactions both manually and by importing the 1099-B from the broker.
I'm pretty sure this is a TT 20 bug , since nothing has changed in the way I enter these transactions.
Has anyone else noticed this? Please be very careful as this may cause you to be double-taxed on the same income.
Hey, I am seeing the same issue. There is another thread on this forum discussing similar issues.
In my case, part way through the ESPP Step-by-Step, the screen starts saying "shares from Not employer stock".
When you click "Yes" on the "Was this a sale of employee stock?" screen, it creates a worksheet to calculate the adjustments. But, halfway through the process, once you click "Continue" on the OK, we just need a few more details" screen, TT creates another worksheet that is not actually properly connected to the transaction (that seems to be the bug). So you end up with 2 partially filled out worksheets after the whole process, and so TT can't calculate the proper compensation income to do the cost basis adjustment.
Here is the what I found as a work around. I switch between the Step-by-Step view and the Forms view.
Initially populate the share sale data from 1099-B in Step-by-Step view.
When you get to the the Tell us about the ESPP sale screen, select the employer, click next. It brings you to the "OK, we just need a few more details" screen. Switch into the form view (from that point on don't use the Step-by-step interface for the sale). Manually fill out the Employee Stock Transaction Worksheet with data from your form 3922 for this particular transaction. You should scroll down a little bit and confirm you see the correct Compensation Income in that sheet once you fill out the info.
Switch back to Step-by-Step view. Click on some tab like "Personal Info" (so that you don't proceed through the Step-by-Step for the transaction. Then you can go again to the Federal Taxes/Stock Sales/brokerage screen, "Edit" the transaction you just entered, click through "Next/Done/Continue" (without changing any of the data), until you get to the screen where it says "Here are the ESPP purchase lots we have so far", and it should have the correct info associated with that sale. At least this convoluted process works for me.
Now repeat the process for the next ESPP sale.
Thank you. Yes, we are seeing the same thing.
I will wait for Intuit to do their job and fix this bug. And if it doesn't happen soon, I will switch to the competition.
I am seeing a similar bug. I enter in the adjusted cost basis during the interview questions but the adjusted cost basis does not make it through to the 1099 form. I did create a separate manual entry on the 'Capital Gain (loss) Adjustments worksheet and this worked for two separate stock sales. Problem is, when I saved the file and reopened it the next day one of the manual entries was gone! Looks like I need to wait for Turbo tax to fix this. Also, I'm no longer seeing the link to 'Turbo Tax chat help' - can someone please point me to this link? My only option was to call a phone number and wait 45 minutes..
Thanks for the investigation, I will give it a try later myself.
Hopefully they can fix it soon given your detailed explanation.
I found another thread with the same issue:
If more people reply the threads hopefully they see this and fix the bug.
Seeing the same thing. My first ESPP entry was fine but the subsequent entries are coming up with $0 costbasis. Uggg.. this the last bit of work I have to do do file.....
I'm seeing the same issue. Is there a way to submit this to Intuit or get some acknowledgement that it's being worked on?
I called in and the support staff captured my info (the $0 cost basis) and they are passing this along in an escalation - which may provide some insights when this would be addressed. I'm supposed to get some updates after a bit.
I am getting the exact same error, where all my cost basis ESPP adjustments come in at "$0." Hoping Turbo Tax pushes a fix soon as this is the last item I need to update in order to file.
There are still plenty of things being fixed and a ton of forms still being approved by the IRS. This is a late start season.
I wouldn't say they "refuse" - they just haven't gotten to that one on the list yet.
TT has always been difficult with regard to ESPP. It seems they change it every year, but it doesn't get easier. This year is the worst. Come on Intuit. Fix it now.
Especially considering they specifically advertise the Premier product handling ESPPs...
I'm having the same issue. When I tried to put in the adjusted cost basis myself, then it still wasn't giving calculating the correct tax (I was still being double taxed). Be very careful with this or else you could end getting double taxed and not know it. Hopefully they fix this soon.
I have the similiar problem with a wash sale and sale at a loss on Form 1099-B Worksheet. Turbotax gives the response "Sales Prices is not between the presdribed upper and lower limits" which is Turbotax's way of blocking you as a customer. A Turbotax product expert had not been briefed on Turbotax's refusal of customers from brokerages yet. And then a Technical Support expert from Turbotax informed me that Turbotax has no intention of fixing this intentional bug. "Not that they don't want you're money, they just don't want your business." Your are blocked from filing and blocked from fixing the negative values ourselves "for your convenience." It's not that experts won't help, they can't. Fidelity and the other brokerages are keeping the dirty secret that their advertizing for Turbotax sends customers into a hole from which there seems to be no emerging unless you go to H & R Block perhaps, eh?
Same issue. It states the correct cost basis after filling out the information boxes manually but then doesn't apply the new cost basis or change taxes due based on the new cost basis.
I logged a case with Intuit and they scheduled a live debug session with me tomorrow. I heard their next update for the desktop edition will be mid-March. Hopefully they'll get this fixed well before then.
Awesome, thank you @jyao109. please let us know how it goes!
Well, it's over an hour past the scheduled time and no call. Two strikes against Intuit. One for the no-show and the other for using their customers as the primary form of QA.
Yikes... that's not a good look for Intuit...
Thanks for taking the time and effort to schedule with them anyways @jyao109
I can't even get to an interview about ESPP sales. My only options for reporting the sale are Stock (non-employee) mutual fund, bond, options, or other. I've been reporting ESPP sales for years, using the full interview. How are you even getting far enough to report that they're ESPP sales?
I finally got a call 90min after our scheduled appointment. I was advised on how to work around this issue by doing the following.
1. Click on forms in upper right (For me it appears in the blue bar next to Flags and Notifications).
2. Scroll down to Form 1099-B Wks ("Company Name").
3. If the resulting form find the "Quick Entry Table" and scroll down to the ESPP sale in question.
4. Manually change the value in "Cost or Other Basis" column using the adjusted cost basis.
5. Repeat Step 4 for each ESPP sale.
I'm not sure if this is kosher or not but then again I'm not a tax expert.
It took me 5 minutes near the end of the call to convince them that this is indeed a bug and that they have other customers experiencing the same issue. Ridiculous. They assured me that they'll log the bug with updates. They also assured me that the fix won't interfere with the workaround... but I would take it with a grain of salt.
I assume what you mean by interview is their "Guide Me/Walk me through everything" option. I've never used this before so I can't comment on this feature. I always use the "I'll export on my own/I'll chose what I work on" option. There it'll ask you if its employee stock for each individual sale.
Hey @jyao109 this is essentially the same work around that I posted above (https://ttlc.intuit.com/community/investments-and-rental-properties/discussion/re-turbotax-2020-refuses-to-correct-cost-basis-for-espp/01/1924029/highlight/true#M62155) , except you enter the Forms before even initiating the ESPP step-by-step workflow. So this will 100% work (ok, 99.9% if Intuit has some other bug I'm not aware of). But I agree it is just a work around, not the normal flow Intuit should expect users to go through.
I just used teksplorer's workaround because I didn't really feel like waiting for TT's fix anymore.
From my basic knowledge it seems to output the correct result. One thing I might add is that if you went through the ESPP wizard before, it might have already created the botched worksheets. So you must first go into the Forms view and delete all the individual ESPP sales wks, and the main ESPP wks. Then you can use @teksplorer's workaround and it will start correctly computing & linking the fields.